China high quality Hot Selling Oil Free 30 Nm3/Hr Oxygen Gas Booster Compressor for 150 Bar Cylinder Filling Pneumatics with Best Sales

Product Description

Hot Selling Oil Free 30 NM3/HR Oxygen Gas Booster Compressor for 150 Bar Cylinder Filling Pneumatics

Descreption of 30 NM3/HR Oxygen Gas Booster Compressor

 

1. Four stage compression, completely oil-free

2. Low noise, lower than 75db, meet medical standard

3. Low speed and long service life

4. Simple operation. Employees can operate after simple training

 

There are 2 types of cooling, i.e., air cooling and water cooling for the oilless reciprocating piston type high-pressure oxygen compressor, there are single acting type and double acting type in the structure, and there are vertical type, angle type, etc., the series high-pressure oilless oxygen compressor has the features of excellent performance, stable operation, high efficiency and energy conservation and long service life, and is widely used for oxygen cylinder filling, chemical process and plateau oxygen supply, it is used with the oxygen making machine to constitute a simple and safe high-pressure oxygen system. 

 

The friction pair of this series compressor involved in the gas compression does not use thin oil lubrication, the friction seals such as piston ring, CZPT ring, etc. are made of special materials with self-lubricating properties, its structural advantages are reflected in the following aspects:

1. No thin oil lubrication in the whole compression system, thus avoiding the possibility of contact of oil with high-pressure and high-purity oxygen gas, and ensuring the safe use of the compressor; 

2. The whole system does not have lubricating oil supply subsystem. The machine is simple in structure, convenient in control and easy to operate; 

3. The whole system has no oil, so there is no pollution to the compressed medium – oxygen gas, and the oxygen gas at the inlet and outlet of the compressor has consistent purity

30 NM3/HR Oxygen Gas Booster Compressor Specifications

  • For Cylinder Filling

  • Capacity: 1-300Nm3/h

  • Inlet pressure: 0.3-0.4Mpa

  • Discharge pressure: 15/20Mpa

  • Power: 2.5-90kw

  • The compressor inlet is equipped with a Y-filter; The compressor adopts packing seal.

  • The maximum average speed of the piston is 0.5 m/s, and the crankshaft speed is 190 r/min.

  • The compressor valve adopts reed valve, and the valve material is imported Swedish steel strip to ensure long-term stable work under the effect of alternating stress.

  • The main bearing of the compressor adopts high quality self-sealing type rolling bearing.

No. Source Inlet.barg Outlet.barg Capacity NM3/hour Power.KW Voltage Connection header.mm Cooling Weight Size.mm Compressor Grade
GOW-90/4-150 Oxygen 3-4 150 90 30 220/380/440/50/60/3 DN40/DN10 Water 1150 1850X1600X1600 4
GOW-100/4-150 Oxygen 3-4 150 100 30 220/380/440/50/60/3 DN40/DN10 Water 1150 1850X1600X1600 4
GOW-120/4-120 Oxygen 3-4 150 120 37 220/380/440/50/60/3 DN50/M22*1.5 Water 1350 1850X1800X1600 4
GOW-150/4-120 Oxygen 3-4 150 120 45 220/380/440/50/60/3 DN50/M22*1.5 Water 1350 1850X1800X1600 4

 

THE INTEGRATED SOLUTIONS FOR MEDICAL GAS SYSTEM

 

 

Medical Gas Supply System Gas Management

The pressure monitoring alarm box is used to monitor the pipeline pressure of the medical center air supply system and respond to pressure changes through a digital microprocessor. When the pressure is higher or lower than the set value, the system will automatically alarm by sound and light, etc., to remind the management to timely process the medical center air supply system.

Comprehensive data collection: monitoring of the source gases and gas-consuming areas in the hospital.

Central monitoring: central monitoring of gas sources and gas-consuming areas, enabling comprehensive data browsing and operation curve analysis.

Fault early warning: abnormal data analysis and trend analysis.

Warranty
The Guarantee/Warranty Period shall be a period of 12 months after on-site startup & commissioning or 18 months after shipment, whichever occurs first. If any trouble or defect, originating with the design, material, workmanship or operating characteristics of any Goods, arises at any time during GUARANTEE/WARRANTY period, ETR shall, at his own expense and as promptly as possible, make such alterations, repairs and replacements.
On-Site Support
ETR can do paid services of on-site startup, commissioning, installation supervision, training, by providing purchaser with the services of qualified English-speaking
engineer at site. ETR shall obtain all permits and licenses required to perform the services under this Agreement. 

FAQ:

Q: Are you factory or trading company?
A: We are factory specilized in 30 NM3/HR Oxygen Gas Booster Compressor from year 2003.

Q: Where are you?
A: We are in ChangSha,ZheJiang province,3 hours from HangZhou by high-speed rail.

Q: Do you accept the small order?
A: Yes, you can contact with us.

Q: Can we put our logo on your products?
A: Yes, we can customized your logo. But the quantity of the items have special requirements.
 
Q: What certifications do products have for your company?
A: CE, ISO and SGS at present.

Q: Do you provide technical support?
A: Yes, technical support is available after sales,if needed,we will provide our technicist to overseas to service you.

A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with 2 pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
air-compressor

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the 2 types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last 9 to 18 months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
air-compressor

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for 2 to 5 diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
air-compressor

Rotary vane compressors with 2 pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose 1 with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

China high quality Hot Selling Oil Free 30 Nm3/Hr Oxygen Gas Booster Compressor for 150 Bar Cylinder Filling Pneumatics     with Best SalesChina high quality Hot Selling Oil Free 30 Nm3/Hr Oxygen Gas Booster Compressor for 150 Bar Cylinder Filling Pneumatics     with Best Sales

Recent Posts